| Designations | Wall Thickness t mm max. | Hardness | Tensile strength Rm N/mm2 | %0,2 proof strength Rp0.2 N/mm2 | Elongation A % | |||||||
| Material | Material Condition | HB | HV | |||||||||
| Symbol | Number | min. | max. | min. | max. | min. | max. | min. | max. | min | ||
| Cu-ETP | CW004A | D | - | |||||||||
| H0,5 | 20 | 35 | 60 | 35 | 65 | - | - | - | - | - | ||
| R200 | 20 | - | - | - | - | 200 | 250 | - | 120 | 40 | ||
| H065 | 10 | 60 | 90 | 65 | 95 | - | - | - | - | - | ||
| R250 | 10 | - | - | - | 250 | 300 | 150 | - | 15 | |||
| H090 | 5 | 85 | 105 | 90 | 110 | - | - | - | - | - | ||
| R290 | 5 | - | - | - | - | 290 | 360 | 250 | - | 6 | ||
| H100 | 3 | 95 | - | 100 | ||||||||
| R360 | 3 | - | - | - | - | 360 | - | 320 | - | (3) | ||
| Note 1 - 1 N/mm2 = 1 MPa | ||||||||||||
| Note 2 - Figures in parentheses are not affiliated with these standards | ||||||||||||